Regulations & registration
Dolomite Stability Investigations Before Drilling a Borehole in Tshwane
By the WaterQuotes team · Published 2026-11-05 · 5 min read
If your property sits on or near dolomitic ground in Tshwane — and much of Wierda Park and surrounds does — a dolomite stability investigation is not an optional formality. It is the document that tells a driller, an insurer and a municipality whether the ground beneath your home can safely absorb the disturbance of drilling, casing and long-term water extraction. Understanding what the investigation covers, who may legally carry it out and what it costs to arrange will save you time, money and significant risk.
Why Dolomite Demands Special Attention
Dolomite is a carbonate rock that dissolves slowly when water passes through it. Over geological time, that dissolution creates voids and cavities underground. When those voids collapse — a process called sinkhole formation — the surface above can subside suddenly and without obvious warning. Tshwane sits on a substantial dolomite belt, and the Centurion–Wierda Park corridor is among the areas where this risk is well documented by provincial and municipal authorities.
Adding a borehole to dolomitic ground introduces new water pathways that can accelerate dissolution and alter the stability of existing voids. That is why the risks specific to drilling in this geology deserve careful reading before any other decision is made — the article on drilling on dolomite sets out the technical picture in detail.
What a Dolomite Stability Investigation Actually Covers
The investigation is a structured geotechnical study. It is not a quick desktop check or a casual site visit. A proper investigation will typically include:
- Desktop study: reviewing existing geological maps, historical records of sinkhole events and any previous geotechnical reports for the property or its neighbours.
- Site walkover: a qualified professional inspects visible surface indicators — depressions, cracked structures, disturbed vegetation patterns — that may hint at subsurface instability.
- Subsurface investigation: this may involve percussion drilling of investigation holes, dynamic cone penetrometer (DCP) tests or geophysical surveys such as ground-penetrating radar or electrical resistivity tomography, depending on the findings of the desktop study and walkover.
- Void detection assessment: specific techniques to identify whether cavities are present, their approximate size and depth, and their proximity to any proposed borehole position.
- Risk classification: the report assigns a dolomite hazard class (Class D1 through D8 under the SANS framework) to the site or specific zones within it, which then governs what, if anything, may be built or drilled there.
- Recommendations: the professional states whether drilling is advisable, whether precautionary measures are required, or whether the proposed borehole position should be relocated.
The South African Bureau of Standards (SABS) publishes SANS 1936, the standard that governs development on dolomite land. This is the reference document underpinning how risk classes are assigned and how investigations are structured.
Who Is Qualified to Conduct One
This is not a task for a general contractor or even a drilling company. The investigation must be conducted by a professional registered with the South African Council for Natural Scientific Professions (SACNASP) — typically a registered professional geologist or engineering geologist — or by a professional geotechnical engineer registered with the Engineering Council of South Africa (ECSA). The South African Council for Geoscience (Geoscience South Africa) is the national body that oversees earth-science practice, and its guidance is clear: dolomite assessments require formal registration and professional indemnity.
Always ask the investigator for their registration number and confirm it is current before work begins. Reputable drillers operating in Centurion and Wierda Park, such as those profiled in the borehole drilling overview for Centurion, will expect to see this documentation as a matter of course.
How Long the Process Takes
Timelines vary with the complexity of the site and the scope the professional determines is necessary. As a rough guide:
| Phase | Typical Duration |
|---|---|
| Desktop study and records search | 3–7 working days |
| Site walkover and fieldwork | 1–3 days on-site |
| Laboratory analysis (if samples taken) | 5–10 working days |
| Report compilation and professional sign-off | 5–10 working days |
| Total from appointment to report | 3–6 weeks |
If geophysical surveys reveal anomalies that require further investigation, the timeline extends. Plan for this possibility rather than booking a drilling rig against a fixed date before the report is in hand.
What It Is Likely to Cost
Prices for professional geotechnical investigations vary considerably based on the size of the property, the scope of subsurface work required and the professional’s hourly rate. Using Johannesburg-area figures as a reference point, desktop-plus-walkover assessments for a standard residential stand typically start in the range of R8,000–R20,000, while investigations that include geophysical surveys or multiple percussion holes can reach R40,000 or more. These are indicative ranges only — confirm scope and fee directly with the professional before any work is commissioned.
If you're ready to find drillers who already know how to work in Tshwane's dolomite zones, compare 3 free borehole quotes — vetted installers, no obligation.
What Happens After the Report
The report’s hazard classification determines your next steps:
- Low-hazard classes (D1–D2): drilling is generally permissible, often without additional precautions beyond responsible management of water leaks and surface drainage.
- Mid-range classes (D3–D4): drilling may be permitted with specific precautions — position adjustments, casing specifications, or ongoing monitoring requirements.
- Higher hazard classes (D5–D8): drilling may be inadvisable or prohibited. In some cases, a borehole on a neighbouring, lower-risk portion of a large stand may still be viable. In others, the honest answer is that the site is unsuitable.
The report does not expire immediately, but it reflects conditions at the time of investigation. If significant earthworks, construction or changes to drainage have occurred on or near the property since the report was compiled, an updated assessment is prudent before drilling proceeds. This is a point worth raising directly with your chosen driller and the professional geologist.
For homeowners exploring borehole options in the broader Wierda Park area, the Wierda Park borehole drilling guide covers the full process from site assessment through to pump selection and registration, within the specific context of this suburb’s geology and municipal requirements.
Once your dolomite report confirms the site is suitable, getting competitive pricing is straightforward. Request quotes from up to three vetted installers — no obligation, no spam.
The Practical Bottom Line
A dolomite stability investigation adds time and cost to a borehole project. It is also the single document most likely to prevent a catastrophic outcome on dolomitic ground. Drillers who ask for one before accepting a job are not being obstructive — they are being responsible. If a driller offers to skip the investigation to get started quickly, treat that as a warning sign rather than a convenience. Arrange the investigation first, appoint a SACNASP- or ECSA-registered professional, and keep the signed report on file. It will be required by your insurer and potentially by the municipality when you register the borehole.
Quick answers
Is a dolomite stability investigation a legal requirement before drilling a borehole in Tshwane?
There is no single national statute that universally mandates a dolomite investigation for every borehole, but Tshwane's municipal by-laws and standard building and development regulations on dolomite land effectively require one before significant groundwork is approved. Beyond legal obligation, most professional drillers and insurers operating in dolomite-risk areas will not proceed without a current report. Check with the City of Tshwane's development management office for the precise requirement applicable to your erf.
Can the driller organise the dolomite stability investigation on my behalf?
Some established drilling companies maintain working relationships with registered geologists and can facilitate the introduction, but the investigation contract should sit between you and the registered professional — not hidden within a drilling package. This ensures the geologist's professional obligation runs to you as the property owner. Always receive the report directly and retain the original.
How do I verify that my geologist is properly registered to conduct a dolomite investigation?
Ask for the investigator's registration category and number with SACNASP or ECSA. Both councils maintain online registers that allow you to confirm current registration status. Geoscience South Africa also provides guidance on appropriate professional categories for dolomite work. Do not commission an investigation from someone who cannot supply a current registration number.
Will the dolomite investigation tell me exactly where on my property to drill?
A good investigation will identify areas of lower risk and may recommend a preferred drilling position, but it does not guarantee that any specific spot is completely free of subsurface voids. The report provides a risk classification and professional recommendations; the final position decision should be made jointly by the geologist and the driller, taking both the report findings and practical access constraints into account.
Does an existing dolomite investigation on my property cover a new borehole application?
It may, depending on when it was conducted, what scope it covered and whether anything on the property has changed since. A report more than five to ten years old, or one conducted before significant construction or landscaping, is likely to need updating. Present the existing report to your chosen registered geologist and ask them to confirm whether it remains adequate for the proposed drilling position and current site conditions.
Sources & notes
Pricing reflects typical Johannesburg market ranges and is confirmed by installer quotation. References: Council for Geoscience · SABS
Ready to compare? Get up to 3 quotes from vetted borehole drilling installers in Johannesburg — free, no obligation.
Get 3 free quotes